Dynamic or static pass box

Pass Box with modular HPL panels (48 mm thick) or modular metallic panels (60 mm thick).
Each side features a door composed of an S15 anodized aluminum or lacquered painted frame, with a 6 mm thick double-glazed safety glass vision panel, fully flush with the aluminum.
All internal profiles of the pass box have smooth, rounded corners, both inside and outside, to facilitate cleaning. The groove radius is between 50 and 60 mm.
The S15 anodized or lacquered aluminum profiles allow for interlocking assembly using clip-on systems. The connection with the panels is made through invisible profiles, also clipped flush, and sealed with 2 mm food-grade silicone joints, making cleaning and disinfection easier.
Each door is equipped with two pairs of rounded aluminum hinges, each hinge offering four adjustment points (right, left, up, and down). The door locks with a recessed piston latch.
A filtration unit with a fan system is included to create a sterile environment for dynamic pass boxes.
Locking System:
Timed interlocking system
Adjustable interlock delay (from 0 to 30 seconds), integrated within the door or panel structure
Audible buzzer upon opening + indicator lights on both sides
Red: Access denied
Green: Access allowed
In case of power failure, the system remains operational via a 12V battery for a minimum of 5 hours. After this time, both doors are released.
Door operation is controlled by a push button on each side.